The DHP multi-cylinder hydraulic cone crusher is a high-performance cone crusher developed by our co
The DHP multi-cylinder hydraulic cone crusher is a high-performance crushing equipment with advanced technology, developed by our company on the basis of introducing new foreign technologies. It breaks through the traditional structural design of cone crushers and adopts the laminated crushing principle, which significantly improves crushing capacity and product quality.
Automatic adjustment for easier operation: By controlling the hydraulic oil station, automatic adjustment of the machine can be realized, greatly simplifying operating procedures.
During operation, the motor drives the belt pulley, coupling and transmission shaft. The cone assembly gyrates eccentrically under the force of the eccentric sleeve. The crushing wall periodically approaches and leaves the concave wall fixed on the adjustment sleeve. In this way, ores inside the crushing chamber are continuously subjected to impact, extrusion and bending force to complete crushing.
It is widely used in ore crushing, high-hardness rock processing, construction material crushing, cement plants, aggregate production and other industries.
| Model | Cavity type | Max.feed size (mm) | Range of discharge port | Motor power(kw) | Capacity (t/h) | weight(t) | ||||||||
| Closed side setting (mm) | ||||||||||||||
| 13 | 16 | 19 | 22 | 26 | 32 | 38 | 45 | 51 | 10.9 | |||||
| DHP200 | C | 185 | 22-38 | 160 | 180 | 195 | 210 | 225 | ||||||
| M | 125 | 16-32 | 118 | 140 | 163 | 182 | 200 | |||||||
| F | 95 | 13-26 | 95 | 115 | 135 | 160 | 180 | |||||||
| DHP300 | EC | 230 | 26-51 | 220 | 230 | 270 | 320 | 370 | 400 | 17.8 | ||||
| C | 221 | 22-45 | 210 | 225 | 260 | 310 | 360 | |||||||
| M | 150 | 16-38 | 155 | 175 | 200 | 220 | 260 | 295 | ||||||
| F | 107 | 13-32 | 110 | 135 | 165 | 195 | 225 | 250 | ||||||
| DHP400 | EC | 300 | 32-51 | 315 | 365 | 420 | 480 | 520 | 25 | |||||
| C | 250 | 26-51 | 315 | 350 | 405 | 470 | 500 | |||||||
| M | 200 | 22-45 | 266 | 302 | 340 | 390 | 450 | |||||||
| F | 120 | 16-38 | 198 | 210 | 260 | 300 | 330 | 380 | ||||||
| DHP500 | EC | 335 | 32-51 | 400 | 460 | 560 | 615 | 715 | 34.1 | |||||
| C | 280 | 26-51 | 390 | 455 | 550 | 612 | ||||||||
| M | 210 | 22-45 | 340 | 382 | 440 | 545 | 600 | |||||||
| F | 133 | 16-38 | 285 | 305 | 335 | 378 | 435 | 540 | ||||||
| DHP800 | EC | 355 | 32-63 | 600 | 720 | 800 | 900 | 1028 | 1200 | 69 | ||||
| C | 305 | 32-51 | 710 | 785 | 890 | 1000 | ||||||||
| M | 260 | 26-45 | 620 | 698 | 780 | 885 | ||||||||
| F | 215 | 22-38 | 480 | 520 | 610 | 690 | 780 | |||||||
Featuring intelligent design, the machine digitally displays crushing status and equipment operation data, with program control, fault alarm and automatic oil pressure adjustment. It enables intuitive monitoring and convenient adjustment. Compared with spring cone crushers, under the same crushing cone size, its output is 35%–60% higher and power consumption reduced by 20%.
By adjusting the installation positions of components and replacing certain wear-resistant parts, the machine can be switched among coarse, medium and fine crushing cavities. In case of instant overload caused by uncrushable iron materials, no disassembly is required. The hydraulic system can automatically discharge foreign objects inside the crushing chamber.
This crusher is equipped with a dedicated thin-oil lubrication system to ensure steady oil circulation and full lubrication of all key components. The multi-point split hydraulic lubrication control system provides dual protection for bearing lubrication as well as reliable overload protection.
By controlling the hydraulic oil station, automatic control and adjustment of the machine can be realized, simplifying operating procedures effectively.
